Disclaimers

Disclaimers. I Spy Ltd.

I Spy Ltd is a Non-Destructive Testing company.

Invasive inspections are not part of my company.

All inspections are to be undertaken with the client providing safe access to inspection area plus consent to be on property and signing I Spy Ltd check sheet.

Only persons directly involved with inspection to be in inspection area.

Oxygen in inspection area to be of a safe breathing standard and no Hazardous substance in area.

Inspection reports reflect the conditions found on the day and time of inspection.

I Spy Ltd will not be liable to any customer or any other person for any direct, indirect, incidental or consequential damage or loss of any nature howsoever caused (whether based on tort (including negligence), contract or otherwise) including, but not limited to, loss of profits, loss of sales opportunity, damage to equipment or property or any other claim whatsoever arising directly or indirectly or in any way attributable to the performance or non-performance of our services or other obligations.

All reports written, verbal or visual are on the day and time and should not be read as a guarantee for or against failure, or should it be taken as a quantitative measure of deterioration or malfunction and is an indication that an abnormality may exist.

It is the responsibility of the owner or representative to further investigate findings and determine any corrective measures to be taken.

I Spy Ltd will not be responsible for fault diagnosis or action required. It is recommended that all faults be fully investigated by qualified personnel.

In no event shall I Spy Ltd be liable to anyone for collateral, incidental or consequential damages in conjunction with or arising from the use of reports or information supplied.

Any liability of I Spy Ltd in connection with any report issued by it is limited to the person, company to whom the report is addressed, and I Spy Ltd disclaims any responsibility and accepts no liability to any other party for any such report.

I Spy Ltd information supplied cannot be sold or distributed to any third party.

I Spy Ltd report should be read as an indication that an abnormality may exist, which may or may not lead to deterioration or failure.

Mechanical and General Inspections:
It is the responsibility of the owner or representative to ensure all machinery is isolated. Air and battery starting systems to be disconnected and tagged. Electrical systems and circuit breakers to be isolated and tagged, Fuel and Water isolated and Machinery is below 45 deg C. (Video Bore Scope).

All access and inspection covers, hatches, doors, plugs, injectors etc to be remover by owner or representative.

Electrical Inspections:
I Spy Ltd are not Registered Electricians and will require an Electrician to open-close panels and enclosures.
Remove and replace fittings etc and take clamp meter readings.

This will be extra to I Spy Ltd invoice.

Ideally all circuits, Boards and Panels etc being inspected should have a minimum of 40% rated load. This is to high light abnormalities or possible faults in components, systems and wiring.
Building, Property and general Inspection.

I Spy Ltd are not Builders or Building Inspectors. We are Infrared Thermal imaging and Non-Destructive Testing Company.

All reports and abnormalities are to be discussed with your Builder or Building Inspector or other qualified person.
Invasive inspections are not part of my company.

A thermal imaging camera is not X-Ray and cannot see through walls and will not detect moisture. The infrared camera detects infrared radiation. The presence of moisture will usually create a variance in heat signature which the Infrared camera can usually detect, but this can only be interpreted as an indication of moisture presence and needing confirmation.

Only areas with direct visual access can be inspected. Curtains, furniture etc may require moving to give visual access. It is like any visual camera. If you can’t see it, you can’t check it.